|
|
|
|
 |
|
|
|
|
|
|
Our inventory is too extensive to display all the items. Here is a sample of the products we carry. Please contact us if you do not see what you are looking for.
|
|
|
Upflow & Multi-Position APPLICATION 1 1/2 - 5 ton sizes Upflow and multi-position 3 Stage operation (25 kW) Sequenced for demand management External access to heater circuit breakers INSTALLATION
1 Piece design for easier installation 4-way airflow convertibility
CABINET 1" Mat-faced insulation Painted heavy gauge galvanized
cabinet Filter rack with filter built into every air handler Corrosion proof drain pans COMPONENTS Efficient PSC Blower Motors Standard
Transformer and Blower Relay Field Installed 5-25 kW Electric Heat
Kits with easy plug connections Selected models available with factory
installed heat Built in indoor time delay for increased efficiency
ACCESSORIES Downflow conversion kit Horizontal drain pan
kit (BCU models only) Side return filter kit (2 & 3 ton models only)
HYDRONIC HEAT Field installed hydronic heat Hydronic heat
capacity from 14,000 Btu to 124,000 Btu For use with boilers
or water heaters WARRANTY 5 Year all parts.
|
|
|
|
|
|
|
|
Cased G-90 insulated cabinent for maximim durability.
Horizontal flow. Lanced aluminium fin and rifled copper tubing for higher efficiency and capacity. 5 year parts warranty. Cased and Uncased upflow/counterflow and dedicated horizontal Evaporator coils.
Antimicrobial additive in the drain pan to resist mold and midew growth. One of the lowest water retention drain pans in the industry to minimize mold and mildew growth.
Insulated steel coil case with high quality painted finish. Two dual drain connections on the front of coil for installation flexibility of drain lines around furnace vent and utility connections. Tubing located at door split for easy coil service or coil cleaning.
External cabinet mounted distributor body designed for easy changing of
orifices and fast TXV connections.
|
|
|
|
Heavy-duty, high-efficiency scroll compressor with fewer moving parts, environmentally friendly R410A refrigerant and 10-year limited warranty*.
Insulated compressor blanket for quiet operation.
High and low pressure switches extend the operating life of the unit.
Enhanced aluminum fins and copper tubing for high efficiency and capacity.
Durarail raised coil and cabinet base prevents debris and moisture from collecting in coil and causing loss of airflow.
Full access panel for easy installation and service ability.
Powder paint cabinet finish for maximum durability and rust resistance.
Heavy-duty ultra guard grill protects recessed coil from damage.
Fan discharge designed for quiet operation.
High-performance filtration drier is shipped with unit and installed by your dealer for added protection and durability.
|
|
|
|
Ductless split system select from over 100 single or muti-zone system for cooling or heat pump applications. Ideal solution for: Retail shops/offices,homes with hydronic heating systems,
Home additions,churches and historcialstructures,computer rooms,institutional or residental buildings without exsiting duct work. Seventy five (75) zone combinations. Indoor units are Available for chilled water appplication, selected models with hydronic heat. Air handlers in four (4) Styles and nine (9) capacities. Optional supplement electric heat. Voltage options. Low voltage interconnect between indoor/outdoor unit. Maximum total interconnect is 100 feet,including 35 feet of lift. Each zone completely independent for greater temperature control and cost savings.
|
|
|
|
MC4/MH4
2, 3 and 4 zone combinations of circuit capacities ranging from 9,000 to 30,000 BTU/h are housed in a top discharge cabinet (MC4/MH4). Total MC/MH system capacity is 60,000 BTU/h. Reciprocating compressors are used in all but the 9,000 and 12,000 BTU/h MC4/MH 4 systems.
MC/MH Features:
Total interconnect to each air handler of up to 100 feet, including up to 35' of lift for flexibility in installation
Separate compressors and coil sections for each circuit
Independent circuit control
Independent refrigerant piping
24v interconnect to air handlers
G-60 Galvanized Steel Cabinet
|
|
|
|
No-weld, crimped aluminized steel heat exchanger with "wide chamber design". Longer life with no welds to break. Highly corrosion-resistant. Efficient, quiet operation - no "creaking".
20-Year Limited Warranty on heat exchanger.* Assured quality and factory back-up.
Self-diagnostic Honeywell enhanced "Blue Sentry" SmartValve II?. Increases unit reliability, integrating ignition and gas control function.
Continuous low-speed fan capability for electronic air cleaner. Greater comfort and fresher, cleaner air.
Durable, one-piece, baked polyester pre-painted steel cabinet. Long-lasting, high-quality finish that resists scratches and rust.
Beckett aluminized steel "in shot" burners with sound reducers. Reliable, smooth and efficient light-off.
Heavy-duty induced draft motor with stainless steel shaft and fan cooling. Durable and reliable for years of trouble-free service.
Solid-state integrated control board with A/C relay, plus terminals for adding an electronic air cleaner, humidifier and twinning two furnaces. Time- and money-saving convenience during installation of accessories. Twinning feature permits low-cost hookup of two furnaces for simultaneous operation.
Fully-insulated cabinet and blower compartment. Enhanced efficiency and lower sound levels.
|
|
|
|
Heavy-duty heat exchanger with ceramic combustion chamber. Increased
efficiency and longer life.
Foil-faced high density fiberglass insulation. Reduces heat loss and noise.
Multi-speed direct drive blower with sealed bearings. Quieter operation.
Factory-wired transformer package and cooling fan relay. Easy add-on
cooling installation.
Beckett flame retention, high static pressure burner. Quality, efficient
combustion.
Durable one-piece, baked polyester pre-painted steel cabinet. Protects
components and helps assure long life.
Easily accessible clean out ports. Makes cleaning the heat exchanger quick
and simple.
Primary control with interrupted ignition, pre-purge and diagnostics.
Longer life, smooth ignitions and ease of service.
Furnace capacity is measured in British Thermal Units Per Hour (BTUH). It's
extremely important that you have the right capacity for your home. A system
that's too small won't provide the consistent, cozy warmth you want. Too
large a unit, on the other hand, will needlessly increase your energy costs,
not to mention the higher purchase price.
Your Armstrong dealer can size up your home and recommend an ULTRA 80 oil
furnace of optimum capacity. The analysis will consider such factors as
location, construction, square footage, window area, storm windows, wall and
ceiling insulation.
All heating systems operate in essentially the same way. They take in cool
air (from your home or from outside your home) and return it as warm air.
But not all furnaces have the same airflow pattern, or configuration. There
are four basic configurations, one ideal for your home.
All specifications are subject to change without notice.
If you're building or remodeling, you can design to accommodate any of the
four airflow configurations. In replacement situations, your old furnace
will likely dictate the airflow pattern of your new one. ULTRA furnaces are
available in a wide range of capacities and efficiencies and in all airflow
configurations. Your Armstrong dealer can help you select a high efficiency
ULTRA furnace that precisely meets your home heating requirements.
Your dealer will help you select the Ultra 80 oil furnace with the right
capacities and efficiencies for your home.
All Ultra 80 oil furnaces are designed, tested and assembled to assure
quality, efficiency and dependability - and exceptional value in home
heating. Naturally, all Ultra 80 oil furnaces meet or exceed all recognized
safety, performance and efficiency standards.
|
|
|
|
|
